Page Comparison

...

Your IP address will likely be different to the one listed in the picture above.

Setting up

...

Here you can take the following actions to set up the device successfully:

1. Open your web browser and type in the Star printer’s IP address into the URL field

2. Log in to the Star Network Utility using these credentials
   User: root
   Password: public

3. Click on WebPRNT in the left side menu.
   The WebPRNT Service field should show ENABLE. If it doesn’t, please switch it to ENABLE.
   TCP Port Number should be 80

4. Click submit

5. Select Save

6. Chose the option Save > Configuration printing > Restart device and then click Execute.

The receipt printer should restart now and print a new configuration report.

...

Setting up SSL/TLS

1. Open your web browser and type in the Star printer’s IP address into the URL field

2. Log in to the Star Network Utility using these credentials
   User: root
   Password: public

3. On SSL/TLS in the left side menu, click on on the Create Self-Signed Certificate/CSR Button.

4. Enter in the available fields with your local information.
   Domain should match the IP Address of the printer.

...

Or follow video: https://goo.gl/SRgz4t

On Ipad

...

Double-click the Self-signed certificate
Click Install on install Podfile
Click Done

...

(Must config on the Safari)

1. Click on the Download button on the Create Self-signed Certificate page to show a popup like the below picture, and you need to click on the Allow button to download the profile to the iPad

   Image AddedImage Added

2. After that, open the Settings on iPad-> Click on the Profile Download-> ClickSS on the Profile that has the IP address of the TSSP650 printer-> Install that Profile

Image Added

3. Then click on General -> About -> Certificate Trust Settings-

4. Turn on item reference to IP Address of Printer
   Click Continute

Or follow video: https://goo.gl/wPBfpi

...

1. Log into the POS, open the side menu on the left and click Settings

2. Click Printer ⇒ Star WebPRNT Printer

   1. Enable and fill out your printer’s IP address (which you got from the steps above) and the port=

   443 

...

1. 1. 8443 (After saving the configuration successfully, the printer will print out a paper including the port ID as the below picture)

      Image Added

...

3. Click on the check button

Check the button at the bottom of the page. If the printer prints out a receipt that reads “PWA POS test” “Testing connection from Magestore POS” then the printer is successfully set up and you can use it .to print the receipt on POS

Image Added