Sometimes on the POS, you don’t see the product you created in the Magento backend. Here are 4 common reasons why it happens:

1. You set [Enable product] = No in the backend

If you don’t enable the product, the product doesn’t show on the POS.

Open

2. The configuration “Visible on POS” = No in the product details

If you set the configuration [Visible on POS] = No, the product doesn’t show on POS.

Open

We have another detailed article that explains how to enable products on POS.

3. Product is not updated yet to your local browser

In case the POS is running in offline mode, it will update data based on the time range configured in the POS setting.

You can find these settings under Go to POS > SETTINGS > SYNCHRONIZATION

In this example, we set the sync time to 5 mins. This means the POS will update product data every 5 mins, so any changes won’t be updated immediately. You can wait for the POS to update data or manually refresh the POS by pressing F5.

To know how to set up synchronization time, you find here: How to set up Synchronization time

4. Re-Index

Run command